Women's Pants/Pull On Flare Pants Pattern | Elastic Waist Trousers PDF | Front Seam Slit Pants | Casual Lounge Pants | Easy Sewing L-XXL
.avif)
1 / 5Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 4
Step 3
- Press open the front center seam of the pants and press the seam allowance of the slit to 1.0 cm.
2
Page 4
Step 4
- Secure the seam allowance of the front slits with invisible stitches, stopping 5 cm above the bottom of the pant legs.
3
Page 4
Step 2
- Sew the center seam of the front pant piece up to the marking for the slit, placing the central and side pieces right sides together.
4
Page 4
Step 1
- Finish the edges of the central and side sections of the front pant piece separately.
6
Page 5
Step 6
- Sew bar tacks along the front pant slit, aligning the slit folds edge to edge. Each bar tack should be 1.0 cm wide.
7
Page 5
Step 5
- Mark seven bar tacks along the front pant slit, spacing them 7 cm apart.
9
Page 5
Step 8
- Sew and finish the side seam of the pants at the same time using a 4-thread overlock machine (or sew with a regular machine and finish with a 3-thread overlock), making sure to align the notches.
10
Page 6
Step 11
- Stitch and serge the inseams of the pants at the same time using a 4-thread overlock machine (or stitch on a regular sewing machine and serge with a 3-thread overlock).
11
Page 6
Step 12
- Press the inseam allowances toward the back leg of the pants.
13
Page 6
Step 10
- Using an iron, gently stretch the back inseam until its length matches the front inseam (scan the QR code to watch the video).
14
Page 7
Step 16
- Join the right and left pant legs along the seat seam with a double stitch: sew one way first, then go back, placing the second stitch 1.0 mm from the first.
15
Page 7
Step 14
- Sew along the bottom edge of the pants using a flatlock machine. If a flatlock machine isn’t available, you can finish the raw edges first, then stitch them together with a regular sewing machine. Allow for a 2.0 cm seam allowance.
16
Page 7
Step 18
- Sew the ends of the waistband together, matching the notches, and leave a 2 cm opening to insert the elastic.
18
Page 7
Step 15
- Secure the seam allowance at the bottom of the slit with invisible hand stitches.
19
Page 8
Step 23
- Stitch the ends of the elastic, overlapping them by 1.0 cm. Make sure the elastic doesn't get twisted!
20
Page 8
Step 19
- Press open the joining seam and then fold the waistband in half lengthwise and press.
21
Page 8
Step 20
- Sew and serge the waistband to the top edge of the pants at the same time using a 4-thread overlock machine (or sew with a regular sewing machine and serge with a 3-thread overlock), making sure to align the notches.
22
Page 8
Step 21
- Press the waistband seam allowance down toward the pants.
23
Page 8
Step 22
- Insert the elastic into the waistband, making sure the length matches your size.
26
Page 9
Step 25
- Add vertical stitches at the waistband along the side seams of the pants to keep the elastic from twisting.
