Women's Tops/Sleeveless Top Sewing Pattern | Mock Neck Shirt PDF | Womens High Neck Tank | Basic Minimalist Top | XS-M Digital Download
.avif)
1 / 5Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 5
Pressing Front Panel
- Press the front panel in half along the center line, matching up the side edges with the wrong sides facing in.
2
Page 5
Sewing Center Pleat
- Sew the pleat down the center of the front panel, keeping a 4 mm distance from the fold.
4
Page 5
Fusing
- Attach a 1.0 cm wide strip of fusible interfacing to the shoulder seam of the back piece on the wrong side.
5
Page 6
Sewing Shoulder Edges
- Sew and finish the shoulder edges at the same time using a 4-thread serger. Seam allowance: 0.7 cm.
6
Page 6
Pinning Shoulder and Collar Seams
- Pin together the shoulder seams and the side seams of the stand, making sure the right sides are facing each other.
7
Page 6
Pressing Collar Edge
- Press the top seam allowance of the all-in-one collar 1.5 cm to the inside.
8
Page 6
Pressing Shoulder Seams
- Press the seam allowances of the shoulder seams toward the back.
9
Page 7
Pinning Armhole Binding
- Pin the armhole binding to the armhole edge, aligning the right sides together.
10
Page 7
Gathering Armhole
- Gather the basting stitch, easing the section by 1.0 cm. Tie knots at both ends.
11
Page 7
Pressing Armhole Binding Seam
- Press the seam allowance of the armhole binding toward the binding.
12
Page 7
Stitching Armhole Binding
- Stitch the armhole binding to the armhole edge, using a 0.7 cm seam allowance.
13
Page 8
Aligning Binding
- Guide it to the wrong side and align it with the seam where the binding was attached.
14
Page 8
Basting Binding
- Baste the pressed edge of the binding, folding the attached binding over to the wrong side of the front and back pieces.
15
Page 8
Topstitching Armhole Binding
- Topstitch the armhole binding seam from the binding side, keeping the stitching 0.1 cm from the edge.
16
Page 8
Pressing Binding Edge
- Press the second edge of the binding onto the binding itself.
17
Page 9
Pressing Armhole
- Press the armhole with an iron. * For garments made with heavier fabrics, you can skip binding the armholes. Instead, press the seam allowances toward the inside and secure them with flatlock stitching.
18
Page 9
Decorative Topstitching
- Sew a decorative topstitch along the armhole at 0.7 cm, securing the pressed edge of the binding.
19
Page 10
Pressing Side Seams
- Press the seam allowances of the side seams towards the back-panel.
20
Page 10
Pinning Side Edges
- Pin the side edges together, aligning the edges and notches, with right sides facing each other.
21
Page 10
Sewing Side Edges
- Sew and finish the side edges at the same time with a 4-thread overlock. Seam allowance: 0.7 cm.
22
Page 10
Securing Armhole Area
- Secure the side edges at the armhole area, aligning the armhole edges. Seam allowance: 0.7 cm.
23
Page 11
Pressing Collar Edge
- Press the stitched top edge of the placket.
24
Page 11
Topstitching Collar Stand
- Topstitch along the upper edge of the self-cut stand using a flatlock machine. Allowance: 1.2 cm. Use a hook to pull the threads inside the pad seam from the wrong side.
25
Page 11
Securing Armhole Seam Allowance
- Sew the seam allowance at the armhole area, pressing the allowance toward the back.
26
Page 11
Hemming Bottom Edges
- Topstitch along the bottom edges of the front and back pieces using a flatlock machine. Allowance: 3.0 cm. Use a hook to pull the threads inside the pad seam from the wrong side.
