Women's Pants/Wide Leg Sweatpants Pattern PDF | Elastic Waist Lounge Pants | Pull On Trousers | Comfy Womens Sewing | XS-M
1 / 6Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 4
Pocket construction in the side seams - Step 2.3
- Trim the seam allowances at the corners of the pocket opening facing.
2
Page 4
Pocket construction in the side seams - Step 2.2
- Stitch around the pocket opening, creating small steps at the ends as indicated by the notches. Allow a 1.0 cm seam allowance.
3
Page 4
Pocket construction in the side seams - Step 2.1
- Pin the upper pocket bag to the pocket opening edge on the front pant pieces, matching up the edges with right sides facing each other.
4
Page 4
Pocket construction in the side seams - Step 1
- On the wrong side of the fabric, fuse 1.0 cm wide strips of interfacing to the side seam allowances of the front pant pieces along the pocket opening area.
5
Page 5
Pocket construction in the side seams - Step 2.5
- IRON THE POCKET ENTRY, FORMING A 0.1 CM EDGE FROM THE FRONT HALF OF THE TROUSERS
6
Page 5
Pocket construction in the side seams - Step 2.6
- Pin the top and bottom burlap pieces together along the rounded edge, placing them face to face with each other.
7
Page 5
Pocket construction in the side seams - Step 2.7
- STITCH AND AT THE SAME TIME OVERLOCK THE UPPER AND LOWER BURLAPS TOGETHER WITH A 4-THREAD OVERLOCK MACHINE ALONG THE ROUNDED EDGE, aligning the EDGES. SEAM ALLOWANCE 0.7 cm
8
Page 5
Pocket construction in the side seams - Step 2.4
- STITCH THE SEAM ALLOWANCE FOR THE POCKET ENTRY BY 0.1 CM FROM THE POCKET BURLAP SIDE.
9
Page 6
Pocket construction in the side seams - Step 2.9
- Baste the top edges of the pocket lining to the upper part of the waistband, leaving a 3.5 cm allowance from the top edge of the pants.
10
Page 6
Pocket construction in the side seams - Step 2.8
- Secure the pocket seam allowance along the side edge of the pants, making sure the edges and notches line up. Leave a 0.3 cm allowance.
11
Page 6
Assembling the side seams - Step 3
- Pin the side seams of the pants together, right sides facing, aligning all edges and notches.
12
Page 7
Assembling the side seams - Step 6
- Press the seam allowances of the side seams toward the back.-back piece.
13
Page 7
Assembling the side seams - Step 5
- Finish the seam allowances on the side seams.
14
Page 7
Assembling the side seams - Step 4
- Sew the side seams of the pants. Allow for a 1.0 cm seam allowance.
15
Page 8
Assembling the inseams - Step 8
- Using an iron, gently stretch the back inseam so it matches the length of the front seam.
16
Page 8
Assembling the inseams - Step 7
- Press the bottom hem allowance of the pant leg to 3.0 cm along the notches, folding the allowance to the wrong side.
17
Page 8
Assembling the inseams - Step 9
- Pin the inseams of the pants together, matching up the edges and notches, with right sides facing each other.
18
Page 9
Assembling the inseams - Step 12
- Topstitch along the bottom hem of the pant legs using a flatlock machine. Allow for a 2.0 cm seam allowance. Use a hook to pull the cover threads to the inside for a neat finish.
19
Page 9
Assembling the inseams - Step 10
- Sew the inseams of the pants together and finish the edges at the same time using a 4-thread overlock machine. Seam allowance: 0.7 cm.
20
Page 9
Assembling the inseams - Step 11
- Press the seam allowances of the inseams toward the back of the pants.
21
Page 10
Assembling the seat seam - Step 13
- Press the bottom of the pants with an iron.
22
Page 10
Assembling the seat seam - Step 14
- Pin the right and left pant legs together along the seat seam, aligning the raw edges with right sides facing each other.
23
Page 10
Assembling the seat seam - Step 15
- Join the right and left pant legs along the seat seam with a double stitch: first sew in one direction, then return, placing the second line of stitching just 1 mm from the first. Allow a seam margin of 1.0 cm.
24
Page 10
Assembling the seat seam - Step 16
- Finish the seam allowance on the seat seam.
25
Page 11
Assembling the waistband - Step 17
- Press the seam allowance of the seat, starting 15.0 cm down from the top edge. Keep the seam allowances standing on edge.
26
Page 11
Assembling the waistband - Step 18
- Press the inner seam allowance of the decorative waistband by 1.0 cm, turning the allowance to the wrong side.
27
Page 11
Assembling the waistband - Step 19
- Press the waistband along the top edge, leaving a 4.5 cm gap from the outer edge, and fold the seam allowance toward the wrong side.
28
Page 11
Assembling the waistband - Step 20
- Pin the ends of the waistband together, aligning the edges and placing the right sides facing in.
29
Page 12
Assembling the waistband - Step 21
- Sew the ends of the waistband together, leaving two openings for inserting the elastic, following the placement marks on the waistband pattern. Seam allowance: 1.0 cm.
30
Page 12
Assembling the waistband - Step 24
- Sew the outer edge of the waistband to the top edge of the pants using a 1.0 cm seam allowance.
31
Page 12
Assembling the waistband - Step 23
- Pin the outer edge of the waistband to the top edge of the pants, aligning all edges and notches, with right sides facing each other. Match the waistband seam with the left side seam of the pants.
32
Page 12
Assembling the waistband - Step 22
- Press open the seam allowances where the waistband ends are joined.
33
Page 13
Assembling the waistband - Step 31
- Cut two pieces of elastic to the length shown on the waistband pattern, then insert one piece into the upper part of the waistband through the side opening.
34
Page 13
Assembling the waistband - Step 30
- Press the attached waistband flat with an iron.
35
Page 13
Assembling the waistband - Step 32
- Sew the ends of the elastic together, overlapping them by 1.0 cm.-Make sure the elastic doesn’t twist while joining.-
36
Page 13
Assembling the waistband - Step 29
- Stitch the inner pressed seam allowance of the waistband to the top part of the pants from the inside, 0.1 cm away from the waistband's pressed edge.
37
Page 14
Assembling the waistband - Step 34
- Join the ends of the elastic, overlapping them by 1.0 cm. Make sure the elastic doesn’t twist.
38
Page 14
Assembling the waistband - Step 35
- Close the remaining openings in the waistband using invisible stitches.
39
Page 14
Assembling the waistband - Step 36
- Evenly distribute the elastic inside the waistband and secure it with pins.
40
Page 14
Assembling the waistband - Step 33
- Insert the second piece of elastic into the lower part of the waistband through the opening left earlier.
42
Page 15
Assembling the waistband - Step 37
- Attach vertical fasteners to the top and bottom parts of the belt at the side seams.
