Women's Sweatshirts/Women Sweater Pattern, Zip anorak Pattern for Women, Zip Up Sweater Pattern, Women Sewing Pattern | XS-M | A4, US Letter, Plotter
1 / 6Interactive sewing map
Step-by-step technological process of sewing the garment.
1
Page 5
Step 1
- On the right side of the front piece, mark the center front line up to the mark indicating the end of the zipper insertion. Snip the center front line at the neckline for 2-3 cm.

2
Page 6
Step 2
- Fold the front and back pieces right sides together, align and pin the shoulder seams.


4
Page 7
Step 5
- Topstitch the shoulder seam, catching the allowances 0.5 cm from the seaming line.

5
Page 7
Step 4
- Press the shoulder seam allowances flat, then press them towards the front.

6
Page 8
Step 6
- Fold the outer collar piece right sides together with the garment neckline. Align and pin the raw edges of the neckline and the collar. Set the collar into the neckline. Seam allowance is 0.8 cm.

7
Page 8
Step 8
- Press the seam allowances towards the collar. Press open at the zipper insertion line.


9
Page 9
Step 11
- Cut the center front, stopping 1.5 cm before the zipper. Then cut diagonally towards the ends of the stitching. Stop cutting 1 mm before the stitching line.

10
Page 9
Step 10
- Place the zipper right side down onto the right side of the front piece, aligning the lower zipper insertion line with the end of the zipper. Stitch with backstitches. The stitch length should be 1 cm.


12
Page 10
Step 13
- Stitch the zipper in place. Use backstitches at the beginning and end of the stitching lines.

13
Page 10
Step 12
- Pin, then baste the zipper. The allowance on the garment side is 0.5 cm.

14
Page 11
Step 15
- Fold the inner collar and the outer collar right sides together. Stitch on the straight stitch machine. Seam allowance is 0.8 cm. Use backstitches at the beginning and end of the seam.

15
Page 11
Step 16
- Stitch the vertical edges of the collar to the zipper. Turn the collar right side out.

16
Page 11
Step 14
- Topstitch the twill tape onto the raw edge of the inner collar.

17
Page 12
Step 18
- Stitch the bottom raw edge of the inner collar on the straight stitch machine.


19
Page 13
Step 19
- Place a securing stitch 0.5 cm away from the collar attachment seam. Use backstitches at the beginning and end of the stitching line.

20
Page 13
Step 20
- Topstitch the upper collar turning seam and the zipper along the contour, 0.5 cm from the attachment seam.

21
Page 14
Step 22
- First, press the allowances flat. Then, press them towards the garment body.

22
Page 14
Step 21
- Pin the sleeves into the open armholes. Stitch the sleeves in place on the overlocker.

23
Page 15
Step 24
- Pin the side seams, simultaneously pinning the sleeve seams.

24
Page 15
Step 23
- Topstitch the seams, catching the allowances, 0.5 cm from the seaming line.

25
Page 16
Step 26
- First, press the allowances flat. Then, press them towards the back piece.


27
Page 17
Step 30
- Divide the upper edge of the cuff and the lower edge of the sleeve into 4 equal parts and pin them together, right sides facing. The cuff seam aligns with the bottom sleeve seam.

28
Page 17
Step 29
- Fold the cuffs in half, wrong sides together, towards the hoodie.


30
Page 17
Step 27
- Fold the cuffs right sides together and stitch along the short edge on the straight-stitch machine. Seam allowance is 0.7 cm. Use backstitches at the beginning and end of the stitching line.

31
Page 18
Step 31
- Stitch the cuffs in place on the overlocker in the round.


33
Page 18
Step 34
- Fold the waistband in half, wrong sides together, towards the hoodie.

34
Page 18
Step 32
- Fold the waistband right sides together and stitch along the short edge on the straight-stitch machine. Seam allowance is 0.7 cm. Use backstitches at the beginning and end of the stitching line.

35
Page 19
Step 36
- Stitch the waistband in place on the overlocker in the round.

36
Page 19
Step 35
- Divide the upper edge of the waistband and the lower edge of the garment into 4 equal parts and pin them together, right sides facing. The waistband seam aligns with the left side seam of the garment.
