Pressing open
Pressing seam allowances flat and apart to reduce bulk and create clean lines.
Where it is used
Pressing Zipper Wrap
p. 11- Press the open vertical edges of the fabric wrap piece toward the zipper.

Pressing Sleeve Hem Folds
p. 12- Fold the lower edge of the sleeve to the inside by 1 cm and press; fold over another 1 cm and press again to pre-crease the hem casing.

Pressing the side seams
p. 3- Press the side-seam allowance toward the back.

Pressing Raglan Seams
p. 3- Press the seam, then press the seam allowances toward the T-shirt.

2. Pressing the hem (Front)
p. 5- Press the hem allowance along the bottom edge of the front panel by 2.5 cm, turning it toward the wrong side.

2. Pressing the hem (Back)
p. 5- Press the hem allowance along the bottom edge of the back panel by 2.5 cm, turning it toward the wrong side.

5. Pressing side seams
p. 6- Press the side seam allowances toward the back.

6.3. Pressing sleeve seams
p. 7- Press the seam allowances from stitching the sleeve edges toward the back of the sleeve.

6.7. Pressing cuff seams
p. 8- Press the seam allowances of the cuff seam open. Press the sewn cuff again, folding it in half lengthwise.

6.10. Pressing cuff seams
p. 9- Press the seam allowance from attaching the cuffs to the sleeve hem toward the sleeves.

9. Pressing armhole seams
p. 10- Press the armhole seam allowances toward the sleeve.

Press Back Seam Allowances
p. 4- Press the seam allowances to the wrong side on any back piece (overlock stitching facing up on the right side). At the slit area, press the 0.7 cm seam allowances open in opposite directions.

Related terms
requiresIron
requiresIron
requiresIron
requiresSteam iron
requiresSteam iron
requiresIron
requiresIron
requiresIron
applied toRib knit
requiresPressing cloth