Side seam allowance
The fabric area between the stitching line and the raw edge of the side seam.
Where it is used
3. Pinning side seams
p. 5- Pin the side seams together, matching the edges and notches, with right sides facing.

Stitching Side Seams
p. 6- Similar to the back, stitch the shoulder and side seams using a French seam. It is important to ensure that the allowances are enclosed within the stitching so they do not protrude on the right side. Press the side seam allowances toward the back.

4. Sewing Side Seams
p. 6- Sew the skirt side seams. Allow 1.0 cm for seam allowance.

Pressing Left Side Seam
p. 5- Press the side seam flat. At the machine-stitched area, press the seam allowances open; below that, press them toward the back piece.

Securing Seam Allowances
p. 3- Stitch the seam allowances close to the edge, then remove the basting thread.

7. Sewing side seams
p. 11- Sew the side seams. Seam allowance: 1.0 cm.

7. Sew side seams
p. 11- Sew the side seams. Seam allowance: 1.0 cm.

15.4. Sew seat seam
p. 14- Sew the seat seam to the marked level where the closure begins. Seam allowance: 1.0 cm.

Sewing Center Seam
p. 14- Sew the edges of the center seam between the control markers. Seam allowance 1.0 cm.

Ironing Center Seam
p. 15- Iron out the seam allowance of the middle seam and the allowance of the cut. Direct the cut allowances to the wrong side by 1.5 cm.

Trimming Right Armhole Allowance
p. 9- Trim the seam allowance down to 0.5 – 0.7 cm.

Grasping Allowances Through Side Opening
p. 17- Through the opening in the side seam, grasp all three allowances along the waist edge and turn the garment right side out through the opening.

Related terms
pressed towardsBack pant piece