Side seam pocket construction
Assembling in-seam pockets by attaching pocket lining, clipping corners, topstitching, and securing pocket bags.
Where it is used
2. Pocket Construction in the Side Seams - 2.1
p. 3- Pin the pocket lining to the edge of the pocket opening on the front skirt panel, right sides facing together.
2. Pocket Construction in the Side Seams - 2.2
p. 3- Finish the pocket opening with pocket lining, creating small steps at each end. Allow for a 1.0 cm seam.
2. Pocket Construction - 2.3
p. 4- Clip the seam allowance at the corners of the facing.
2. Pocket Construction - 2.4
p. 4- Topstitch the seam allowance at the pocket opening, sewing 0.1 cm from the pocket lining side.
2. Pocket Construction - 2.5
p. 4- Press the pocket opening, folding the lining toward the inside of the skirt.
2. Pocket Construction - 2.6
p. 4- Pin the lower pocket bag edge to the upper one, with right sides together, aligning the edges.
2. Pocket Construction - 2.7
p. 5- Stitch the curved edge of the pocket bags together. Allow a seam of 1.0 cm.
2. Pocket Construction - 2.9
p. 5- Secure the pocket seam allowances along the side and top edges.
