Separating zipper tape
A zipper that opens completely at both ends, used for jackets and hoodies.
Where it is used
Transfer Collar Seam Marking
p. 9- Zip up the zipper, then transfer the collar seam marking to the opposite tape.
Marking the zipper bottom
p. 13- On the wrong side of the zipper tape, mark a line at the bottom to indicate where the zipper ends. This line should be 2 mm below the pre-installed stopper. Also, mark reference points for the ends of the zipper on the tape, measuring 0.6 cm out from the center of the tape to each side.
Related terms
← requiresZipper installation