Overlocker
A four-thread twin-needle serger used to sew and finish knit seams simultaneously.
Where it is used
Overlock Collar Neckline
p. 7- If the result is satisfactory, turn the collar back to the wrong side and stitch the collar with the overlocker.
Stitch Side and Sleeve Seams
p. 12- Fold the jumper right sides together, aligning the side seams and the sleeve seams, and pin from the back side. In the underarm area, press the seam allowances of the armhole to opposite sides to avoid excessive bulk. Stitch on the overlocker, placing the stitching on the back piece side. Press lightly, then press the seam allowances towards the front.
Step 3: Stitching front strap
p. 3- Stitch and serge the edges of the continuous front strap at the same time using a 4-thread overlocker.
Attaching the yoke
p. 5- 1. Finish the yoke piece and front piece edges with an overlocker from the right side. 2. Place the yoke on the front piece, right sides together, and stitch on a regular sewing machine, 5–7 mm from the edge.
Related terms
← requiresOverlocking
← requiresOverlocking
← requiresOverlock stitching
← requires4-thread overlock stitch
compatible withKnit fabric
← requiresSeam finishing